Vermon Single Crystal High Frequency Linear Arrays

Verasonics now offers two high frequency linear array transducers designed for imaging of small animals and superficial structures.

 

L35-16v Specifications:

 Center Frequency (Mhz)  28
Bandwidth (-6 dB)  >60%
Elements  128
Pitch (mm)  0.07
Elevation width (mm)  8
Maximum voltage  +/-40V
Cable length (m)  1
Compatibility  All Vantage systems

 

This probe provides highly detailed images of small anatomical structures, and can also do Doppler. The L35-16v is compatible with the High Frequency configurations of the Vantage 256, Vantage 128 and Vantage 64LE.

L22-14v Specifications:

 Center Frequency (Mhz)  18.5
Bandwidth (-6 dB)  67% (avg)
Elements  128
Pitch (mm)  0.10
Elevation width (mm)  1.6
Maximum voltage  ±30V
Cable length (m)  2
Compatibility  All Vantage systems

 

The Verasonics L22-14v is available in two models:

  • The standard L22-14v with an elevation focus at 6mm
  • The long focus L22-14vLF, with an elevation focus at 20mm

The standard model provides high-resolution imaging and Doppler for structures within 1cm of the transducer face. The long focus model allows imaging of deeper structures, or structures that are distant because of a standoff, such as may be used for monitoring therapy. Both are compatible with all standard frequency and high frequency Vantage configurations.

Compatibility With VisualSonics Transducers

Vantage 256 High Frequency systems, when equipped with the UTA 360 adapter, will operate high frequency transducers made by VisualSonics, including the MS250, MS400, and MS550. These probes are only available from VisualSonics.

*VisualSonics is a registered trademark.  The VisualSonics name is owned by FUJIFILM Visualsonics Inc. Visualsonics is a subsidiary of Sonosite.